Search results for "Bearing capacity"
showing 10 items of 31 documents
The bearing capacity of footings on sand with a weak layer
2017
Minor details of the ground, such as thin weak layers, shear bands and slickensided surfaces, can substantially affect the behaviour of soil–footing and other geotechnical systems, despite their seeming insignificance. In this paper, the influence of the presence of a thin horizontal weak layer on the ultimate bearing capacity of a strip footing on dense sand is investigated by single-gravity tests on small-scale physical models of the soil–footing system. The test results show that the weak layer strongly influences both the failure mechanism and the ultimate bearing capacity if its depth is lower than about four times the footing width. It is found that the presence of a thin weak layer …
The use of steel angles for the connection of laminated glass beams: Experiments and modelling
2012
Abstract In the present paper the experimental results relative to three-point bending tests on multilayer glass beams and on semi-rigid connections realised with stainless double web angles are presented and discussed. Small and medium size glass beams were tested and load–deflection curves and crack patterns at failure were recorded. The laminated glass specimens, of equal cross-section, were characterised by three different combinations of annealed float and fully thermally tempered glass plies and different interlayers. Steel joints constituted by double web angles to connect two glass beams were tested adopting several geometrical configurations and using stainless steel bolts preloade…
Influence of a thin horizontal weak layer on the mechanical behaviour of shallow foundations resting on sand
2021
The presence of minor details of the ground, including soil or rock masses, occurs more frequently than what is normally believed. Thin weak layers, shear bands, and slickensided surfaces can substantially affect the behaviour of foundations, as well as that of other geostructures. In fact, they can affect the failure mechanisms, the ultimate bearing capacity of footings, and the safety factor of the geotechnical system. In this research, numerically conducted through Finite Element Code Plaxis 2D, the influence of a horizontal thin weak layer on the mechanical behaviour of shallow footings was evaluated. The obtained results prove that the weak layer strongly influences both the failure me…
Centrifuge tests on strip footings on sand with a weak layer
2017
Tests on small-scale physical models of a strip footing resting on a dense sand bed containing a thin horizontal weak soil layer were carried out at normal gravity (1 g ). The results, reported in a companion paper, point out that the weak layer plays an important role in the failure mechanism and the ultimate bearing capacity of the footing if it falls within the ground volume relevant to the behaviour of the sand–footing system. The same problem was also investigated by means of centrifuge tests on reduced-scale models at 25 g and 40 g . The results of these tests, reported and discussed in this paper, confirm that failure mechanisms are governed substantially by the presence of the weak…
Structural performances of pultruded GFRP emergency structures – Part 2: Full-scale experimental testing
2019
Abstract This paper presents an experimental testing of a pultruded glass fiber reinforced polymer (FRP) structure used for emergency applications continuing the discussion presented in a previous paper (part 1) where the study of the characteristics of material and elements are presented. First, the design of the composite structure and components and the evaluation of the structural behavior by means of numerical and analytical approach according to current regulatory codes are described. In this frame, the global and local response was observed according to load paths deriving from the design loads at limit states. Then, the experimental test on a full-scale 2D model is presented at diff…
Analytical prediction of ultimate moment and curvature of RC rectangular sections in compression
2013
This paper presents closed form expressions linking the ultimate bearing capacity to the ultimate curvature of rectangular RC sections subjected to axial load and bending moment acting in one of the two symmetry planes of the section. With respect to possible simplified formulations the following effects are also considered: confinement of the concrete, hardening of the longitudinal reinforcement, and presence of reinforcing bars distributed orthogonally to the neutral axis. The formulation is proposed in dimensional terms after a preliminary definition of the geometrical and mechanical parameters governing the structural response of the class of sections considered. The analytical expressi…
Increasing the Capacity of Existing Bridges by Using Unbonded Prestressing Technology: A Case Study
2014
External posttensioning or unbonded prestressing was found to be a powerful tool for retrofitting and for increasing the life extension of existing structures. Since the 1950s, this technique of reinforcement was applied with success to bridge structures in many countries, and was found to provide an efficient and economic solution for a wide range of bridge types and conditions. Unbonded prestressing is defined as a system in which the post-tensioning tendons or bars are located outside the concrete cross-section and the prestressing forces are transmitted to the girder through the end anchorages, deviators, or saddles. In response to the demand for a faster and more efficient transportati…
Applicability of over-coring technique to loaded RC columns
2014
Stress determination is a very important step in the assessment of the safety of existing reinforced concrete structures. In rock mechanic this goal is achieved with the over-coring technique. The main idea behind such a technique is to isolate a material sample from the stress field in the surrounding mass and monitor its re-equilibrium deformation response. If the materials remains elastic, and elastic properties are known, stresses may be obtained from the corresponding measured strains. The goal of this paper is to evaluate if the over-coring technique is applicable to reinforced concrete members. The results of an experimental investigation on the behaviour of compressed concrete colum…
Generalization of Shear Truss Model to the Case of SFRC Beams with Stirrups
2012
A theoretical model for shear strength evaluation of fibrous concrete beams reinforced with stirrups is proposed. The formulation is founded on the theory of plasticity and the stress field concepts, generalizing a known plastic model for calculating the bearing capacity of reinforced concrete beams, to the case of fibrous concrete. The beneficial effect of steel fibres is estimated taking into account the residual tensile strength of fibrous concrete, by modifying an analytical constitutive law which presents a plastic plateau as a post-peak branch. Around fifty results of experimental tests carried out on steel fibrous concrete beams available in the literature were collected, and a compa…
Experimental and analytical response of masonry elements under eccentric vertical loads
2005
The flexural behaviour of masonry rectangular cross-sections is studied in order to characterize the mechanical behaviour of structural elements under axial eccentric loads by means of a proper law. First the experimental response of walls under vertical centred loads is observed and a stress-strain law depending on two parameters is given in order to fit the experimental results. Subsequently the behaviour of walls nominally equal to the walls mentioned before is investigated under eccentric vertical loads, and the response is observed in terms of moment-curvature relation. To this point a comparison is made between the moment-curvature response obtained experimentally and the moment-curva…